TSI-PTSS 50230 600 MW Thermal (Coal) Power Plant Simulation Software
The Combined Cycle Power Plant Simulator is a comprehensive, dynamic simulation of a typical combined cycle power plant.
Capacity:
- 600 MW
- Coal
- Heavy Oil (warm-up)
- Light Oil (ignition)
- Drum type
- Natural Circulation
- Forced Draft Fans
- Induced Draft Fans
- 6 Primary Air fans (1 for each Pulveriser)
- 6Igniter Fan & Scanner Fan
- Windbox
- Regenerative Air Heater
- Soot blowers
- Electro-static precipitator
- 6 Coal Feeders
- 6 Pulverisers
- Ignition Oil pumps
- Fuel Oil Pumps
- Coal and Oil Burners
- Economiser
- Steam Drum
- Downcomer
- Primary Superheater
- Secondary Superheater
- Reheater
- Attemperators for Superheater
- Auxiliary Steam Header
- HP/IP/LP Turbines
- Main Stop Valve with Bypass
- Turbine Control Valves
- Turbine Turning Gear
- Turbine Lube Oil Pumps
- Turbine Lube Oil Cooler
- Turbine Lube Oil Cooling Water Pump
- Turbine Lube Oil Filters
- Bearing vibration monitors
- Bearing temperature monitors
- Generator with Exciter
- Automatic Voltage Regulator
- Main Generator Breaker
- Synchroscope
- Hydrogen Cooler
- Hydrogen Seal Oil Pump
- Stator Cooling water Pump
- EH Oil Sytem
- DEH Governing System
- Master Control
- Condenser
- Air Ejectors
- Circulating Water Pumps
- Condensate Extraction Pumps
- Condensate Storage Tank
- Makeup Pump
- Air Ejector Steam Condenser
- Gland Seal Steam Condenser with Exhaust Fan
- Condensate Scrubber
- Low Pressure Heaters
- De-aerator with Storage Tank
- High Pressure Heaters
- Boiler Feed Pumps (motor driven)
- Pump trips
- Fan trips
- Turbine trip
- Generator trip
- Fuel trip
- Valve malfunctions
- Instrument malfunctions
- Air temperature
- Cooling water temperature
- Low grade fuel